PVDF Injection Moulding Grade
PVDF Injection Moulding Grade FTH-211
ASTM Test standard
ASTM D1238, 2300C/5kg
ASTM D792, @23/230C
Water absorption (%)
Tensile yield strength(Mpa)
ASTM D638 50mm/min@230C
Yield elongation (%)
Elongation at break (%)
2. Process safety instructions
(1). This product should be processed under 370℃,to avoid producing toxic gases；
(2). PVDF has good fire resistance and smoke inhibition property, however, when meets with fire, it will release toxic hydrogen fluoride gas and fluorocarbon compounds；
(3). Operators should take good care of personal protection during the use procedure and processing.
3. Packaging and storage
(1). PVDF is sealed in plastic bag with 25kg net weight per bag and then putinto drum or cardboard.
(2). It must be stored in clean, cool, dry place.