FEP Resin for Extruding Wire, Cable and Tube

FEP Extrusion Grade
FEP (Perfluorinated Ethylene Propylene) is the copolymer of tetrafluoroethylene (TFE) and hexafluoropropylene (HFP) with excellent thermo-stability and chemical inertness, outstanding electrical insulation and very low friction coefficient. The thermoplastic process techniques can be used to fabricate useful products from FEP.
Our FEP could be used for extruding wire, cable, pipe etc, as substitution for DuPont (Teflon) and Daikin(Neoflon) FEP.
Items | Index | ||||||
FT-1 | FT-2 | FT-3 | FT-401 | FT-402 | FT-501 | FT-502 | |
Appearance | Clean semitransparent pellet | ||||||
Melt Flow Rate (g/10min) | 2.1~4.0 | 4.1~8.0 | 8.1~12.0 | 12.1~16.0 | 16.1-20.0 | 20.1~24.0 | 24.1~27.0 |
Tensile strength (MPa)≥ | 26 | 24 | 24 | 20 | 20 | 18 | 16 |
Elongation at break(%)≥ | 300 | 300 | 300 | 300 | 300 | 280 | 250 |
Melting point(°C) | 265±10 | 265±10 | 265±10 | 265±10 | 265±10 | 265±10 | 265±10 |
S.S.G | 2.12~2.17 | ||||||
Volatile (%)≤ | 0.10 | ||||||
Thermo-stress craze resistance | Very good | Very good | Good | Good | Good | Good | Good |
Volume resistance(Ω·cm) | 1×1016 | ||||||
Breaking down voltage(KV/mm) | 20~24 | ||||||
Dielectric constant(106HZ≤) | 2.10 | ||||||
Dielectric loss tangent(106HZ) | 3.0×10-4 | 4.0×10-4 | |||||
Purposes | Thick layer wire and cable | Wire and cable for general purpose | Thin layer wire | Wire byhigh-speed extrusion | Thin layer wire by high-speed extrusion | ||
- Loading...
- *Title
- *Content
- Name:
- Eric Chan
- Tel:
+0086-186-68076105
+0086-571-87085102
- Email:
- sales@zjfotech.com
- WhatsApp:
- 8618668076105






