A professional supplier and manufacturer of refrigerants

Fotech is a professional supplier and manufacturer of refrigerants and fluorine polymers over 20 years, distributing environmental friendly refrigerant, clean agent fire extinguishing agent, blowing agent, cleaning agent, and high performance new chemical materials...more>
Home / All / Fluorine polymers / PVDF /

Suspension PVDF Extrusion

Suspension PVDF Extrusion

Suspension PVDF Extrusion
CategoriesPVDF
BrandFotech
CAS No.24937-79-9
TypeSynthetic Resin and Plastics
Purity99%
Terms of PaymentL/C, D/A, D/P, T/T
Download
Update TimeDec 7,2024
Detail Information

                            Suspension PVDF Extrusion FL-2006


FL-2006 PVDF homopolymer is a fluorinated semi-crystalline thermoplastic which is obtained by polymerizing vinylidene fluoride, and easily melt-processed by standard methods of extrusion.

1.  Characteristic

Physical Properties

Typical Value

Test Method

Melt Flow Rate(g/10min)

2.0~8.0

230℃/5.0kg, ASTM D1238

Density(g/cc)

1.77~1.79

ASTM D792

Melt viscosity(Kps)

11~17

Shear Rate 100 1/s, ASTM D3835

Water Absorption(%)(Time 24 hr)

≤0.040

ISO 62(method 1)

Mechanical Properties

Yield Strength(Thickness2.00mm)(MPa)

50.0~57.0

50mm/min,ASTM D638

Break Strength(Thickness2.00mm)(MPa)

20.0~50.0

50mm/min,ASTM D638

Elongation at Yield(%)

5.0~10

50mm/min,ASTM D638

Elongation at Break(%)

20~50

50mm/min,ASTM D638

Hardness, Shore D(Thickness2.00mm)

75~80

ASTM D2240

Thermal Properties

Melting Point(℃)

171~175

ASTM D3418

Crystallization Temperature(DSC peak)(℃)

137~144

ASTM D3418

Decomposition Temperature(℃)

375

1% wt. loss / in air


2.  Process safety instructions

(1). This product should be processed under 260℃,toavoid producing toxic gases;

(2). PVDF has good fire resistance and smoke inhibition property, however, when meets with fire, it will release toxic hydrogen fluoride gas and fluorocarbon compounds;

(3). Operators should take good care of personal protection during the use procedure and processing.


3.  Packaging and storage

(1). PVDF is sealed in plastic bag with 25kg net weight per bag and then put into drum or cardboard.

(2). It must be stored in clean, cool, dry place.

Product Certificates
    Product Review
    • Loading...
    Please send your message to us
    Just iln the form below and we will response to you within 24 hours.
    *Email
    *Title
    *Content
    Upload
    • Only supports .rar/.zip/.jpg/.png/.gif/.doc/.xls/.pdf, maximum 20MB.
    Contact Person
    Name:
    Eric Chan
    Tel:

    0086-186-68076105

    0086-571-87085102

    Email:
    Fotech is a professional supplier and manufacturer of refrigerants and fluorine polymers over 20 years, distributing environmental friendly refrigerant, clean agent fire extinguishing agent, blowing agent, cleaning agent, and high performance new chemical materials...more>